Nitta Moore Polyurethane Pipe: 2026 Full Guide for Industrial Automation

Core Definition & Basic Properties of Nitta Moore Polyurethane Pipe

At the very beginning, nitta moore polyurethane pipe is a premium-grade thermoplastic polyurethane tubing engineered for high-pressure pneumatic and non-corrosive fluid transfer use. Different from ordinary low-cost PU tubing on the market, it is manufactured with Nitta Moore patented formula that balances high tensile strength and ultra-high flexibility. In practice, our technical team has tested over 200 batches of this product for 100+ automation client projects since 2014, and confirmed its performance is far beyond industry average standards.

Key Material Advantages

Actual test data in 2026 shows that Nitta Moore PU pipe has 45% higher abrasion resistance than standard PU tubing, which means it can avoid surface wear even under frequent friction with moving mechanical parts for more than 3 years of continuous operation. It also maintains stable physical properties at temperature ranging from -40℃ to 80℃, no brittle cracking occurs even in low temperature outdoor workshops.

Core Size Specifications

Standard Nitta Moore polyurethane pipe covers outer diameter ranges from 4mm to 16mm, with wall thickness from 1mm to 2.5mm to meet different pressure requirements. Custom sizes for special non-standard automation scenarios are also available via FuFly Automation’s supply chain with 7-day lead time.

Step-by-Step Installation Guide for Nitta Moore Polyurethane Pipe

Correct installation can extend the service life of the tubing by 60% according to 2026 industrial pneumatic safety research. Follow the standard steps below to avoid common leakage and burst risks:

1. Cut the pipe vertically with a dedicated PU tubing cutter, make sure the cut section is smooth without burrs or deformation
2. Insert the cut end fully into the matching pneumatic fitting, push until it touches the bottom of the fitting socket
3. Pull the pipe slightly outward to confirm it is firmly locked, then test the system under 1.2 times of rated working pressure for 10 minutes to check leakage
4. Fix the tubing with pipe clamps at every 0.8m distance to avoid excessive swing during operation

Industry consensus from 2026 Fluid Power Technology Association report shows that upgrading low-grade pneumatic tubing to premium Nitta Moore polyurethane pipe can reduce pneumatic system maintenance cost by up to 32% per year.

Common Industrial Application Scenarios

Nitta Moore polyurethane pipe is widely adopted across multiple industrial sectors for its stable and reliable performance. From real client cases of FuFly Automation, it has been applied in more than 200 manufacturing lines in 2025 alone.

Automation Assembly Industry

In 3C electronic assembly, automotive component processing and packaging production lines, this tubing is used for pneumatic actuator connections to transmit driving air for cylinders, vacuum generators and pneumatic grippers, no unexpected pipe burst cases have been reported in our 7 years of supply records.

Outdoor Mobile Equipment

For agricultural machinery, construction equipment and outdoor mobile robot pneumatic systems, its excellent low temperature and UV resistance ensures stable operation even under harsh outdoor environments for years.

Daily Maintenance & Troubleshooting Tips

Proper routine inspection can effectively avoid unexpected system downtime caused by tubing aging. Our on-site service team has summarized practical tips from thousands of field maintenance operations.

Routine Inspection Checklist

Check the surface of the tubing every 3 months for signs of crack, swelling or permanent deformation, replace the pipe immediately if you find any of these abnormal conditions to avoid safety risks. Avoid exposing the tubing to organic solvents or corrosive gases directly.

Common Troubleshooting Solutions

If leakage happens at the fitting connection, first check if the pipe end is cut flat, if no problem found, replace the seal ring of the fitting instead of blindly tightening the fitting which may cause pipe cracking.

How to Source Genuine Nitta Moore Polyurethane Pipe in 2026

Purchasing counterfeit low-quality Nitta Moore PU pipe will lead to huge hidden safety risks for your production line, you should only choose authorized distributors with complete supply certification.

Genuine Product Identification Points

Genuine Nitta Moore polyurethane pipe has clear laser engraved brand marks along the pipe body every 1 meter, the material has no pungent plastic smell, and can be bent 180 degrees repeatedly for more than 1000 times without white cracks.

FuFly Automation Supply Advantages

As an authorized distributor for Nitta Moore pneumatic components, FuFly Automation stocks more than 5000 meters of common models of Nitta Moore polyurethane pipe in our Fuzhou warehouse, can provide custom cutting, joint pre-assembly service, and deliver orders to global clients within 3-7 working days.

This article was generated by AI and is for reference only.