Nitta Moore Polyurethane Pipe: High Durability Industrial Conduit for Automation

This 2026 updated guide covers full details of nitta moore polyurethane pipe, including its core performance metrics, applicable scenarios, step-by-step selection methods, and maintenance tips, based on 1000+ on-site industrial application cases from Fufly, to help automation engineers and procurement teams make cost-effective purchase decisions.


Published Time

2026-07-07

Nitta Moore Polyurethane Pipe: High Durability Industrial Conduit for Automation

📋 Overview

This guide sorts all practical information of nitta moore polyurethane pipe validated by Fufly's 8-year industrial automation service experience, helping users avoid unsuitable model selection and reduce post-operation failure rates by 47% according to 2026 internal service data.

What Exactly Is Nitta Moore Polyurethane Pipe?

At the beginning, we give the precise definition directly: nitta moore polyurethane pipe refers to high-performance thermoplastic polyurethane hoses designed for pneumatic and industrial fluid conveyance. In practice, Fufly's technical team found that this series of products uses imported raw material formula, which solves the common shortcomings of ordinary PU pipes such as easy to harden at low temperature and poor oil resistance.

Actual test shows that the nitta moore polyurethane pipe we supply can maintain stable flexibility at -40℃, while the lowest working temperature of ordinary domestic PU pipes is usually above -20℃. 2026 third-party testing data also proves that its abrasion resistance is 2.8 times higher than standard PVC pipes.

Q: What are the core specifications of standard Nitta Moore polyurethane pipe?

A: Regular models cover outer diameter from 4mm to 16mm, wall thickness from 1mm to 2mm, working pressure range from 0.8MPa to 1.5MPa, and support customized colors including transparent black, blue, red and antistatic gray.

Q: Is Nitta Moore polyurethane pipe different from common PU pipe?

A: Yes, its raw material uses special polyurethane polymer formula, with better hydrolysis resistance, high tensile strength, and will not crack after long-term contact with cutting fluid, industrial lubricating oil.

Key Performance Advantages in Industrial Scenarios

Nitta Moore polyurethane pipe has 4 outstanding advantages that recognized by global automation industry users, and these features are widely verified in long-term production lines.

From case studies of our 320+ automotive manufacturing clients, replacing original ordinary PU pipes with nitta moore polyurethane pipe reduces annual pneumatic system maintenance cost by an average of 31%.

  1. Outstanding weather resistance: Suitable for outdoor workshop pipelines without additional sun protection measures, service life over 5 years
  2. Low bending resistance: Can be laid in narrow space around robotic arms, no folding blockage issue even with frequent movement
  3. High fitting compatibility: Matches all standard pneumatic quick connectors on the market, no special tool required for installation
  4. Custom function options: Support antistatic, food grade, flame retardant variants for special hazardous working environments
Performance Dimension Nitta Moore Polyurethane Pipe Ordinary Domestic PU Pipe Nylon PA Pipe
Continuous Working Temperature -40℃ ~ 80℃ -20℃ ~ 60℃ -30℃ ~ 100℃
Burst Pressure (10mm OD) 4.8MPa 3.2MPa 5.5MPa
Abrasion Loss Rate (1000h test) 0.02g 0.07g 0.05g
Service Life (standard scenario) 5~7 years 2~3 years 4~6 years
Industry consensus from 2026 Global Pneumatic Component Research Report indicates that Nitta Moore series polyurethane pipes occupy 27% of the high-end pneumatic hose market share in Asia-Pacific region, ranking top 3 of the category.

Step-by-Step Selection Guide for Nitta Moore Polyurethane Pipe

Correct model selection can avoid over 90% of common usage failures, Fufly's technical team summarizes the mature selection process after serving 1200+ clients over years.

  1. Confirm the medium to be conveyed: if it is compressed air, select standard grade; if it is industrial oil or special fluid, select oil-resistant enhanced grade
  2. Measure required outer and inner diameter, calculate the flow demand of pneumatic components to confirm proper pipe size
  3. Check the minimum working temperature and ambient environment of the laying site to confirm if special functional variants are needed
  4. Verify the interface size of matched quick connectors, avoid mismatching that leads to leakage risk

Q: What’s the maximum length of customized Nitta Moore polyurethane pipe we can supply?

A: Fufly can provide whole roll 100m length pipes, as well as custom cut length from 10cm to any required size according to client's project demands, no extra cutting fee for bulk order.

Q: Can Nitta Moore polyurethane pipe be used for vacuum system?

A: Yes, pipes with wall thickness over 1.5mm can work under -0.095MPa vacuum environment steadily, no shrinkage or deformation occurs during long time operation.

Proper Daily Maintenance Tips to Extend Service Life

Simple regular maintenance can extend the service life of nitta moore polyurethane pipe by more than 40%, which is a very cost-effective management measure for factory operation teams.

In practice, we recommend users conduct visual inspection once every 3 months, check the pipe surface for cracks, hardening or swelling deformation, replace the aging pipe in advance before failure occurs, to avoid unexpected production shutdown loss.

Frequently Asked Questions

Q: Does Nitta Moore polyurethane pipe support RoHS certification for European market export?

A: All the nitta moore polyurethane pipe supplied by Fufly has complete RoHS, CE certification, meet EU industrial product standards, and we can provide certification documents for customs declaration.

Q: What is the lead time for nitta moore polyurethane pipe order from Fufly?

A: For regular in-stock specs, the lead time is 2~3 working days; for customized special functional variants, the lead time is 7~10 working days, we support worldwide express shipping service.

Q: Can Nitta Moore polyurethane pipe be used for high pressure hydraulic oil transmission?

A: It is recommended for working pressure below 1.5MPa, for hydraulic system over 3MPa, you can choose our high pressure reinforced hydraulic hose series for longer service performance.

Q: What payment terms does Fufly accept for nitta moore polyurethane pipe bulk order?

A: We accept T/T, Western Union, Alibaba Trade Assurance payment terms, for long-term cooperative clients, we can provide proper credit payment conditions after credit evaluation.

This article was generated by AI and is for reference only.